Mecanicien

Posts Tagged ‘Cars’

Warning: file_get_contents(/home/mecanici/public_html/wp-content/plugins/unique_articles/add_article.php) [function.file-get-contents]: failed to open stream: Permission denied in /home/mecanici/public_html/wp-content/plugins/unique_articles/unique_articles.php on line 162

With the failing economy and the falling wages of worker, perhaps the solution to giving your car a different look will be to give your car a complete new paint job. If the mechanics and the engine of the car is in good shape, but you do not fancy the car body, then painting it will be the ideal answer.

Its a fantastic money saver, but even more so if you do it yourself as opposed to having it professionally done up in the workshop. You can do it right if you study the basics and follow the instructions for car spray painting. It’s important though if you decide you are going to take on this project that you are ready to see it complete till the end.

First, you require a few supplies. These consist of:

-coverings to secure the unpainted areas and masking tape to hold these in place -a good car-wash detergent and brush as well as a wax/grease remover. -various grits of sandpaper -primers and paint that’s urethane base for the car spray painting -paint sprayer -safety tools example masks, goggles and protective clothing -knife and putty for fill ins.

One : You must make sure that you wash the car thoroughly to remove all grime and debris. If you dont then these things would be set in with your paint, giving a genuinely daunting look to the finished job. Follow up with a wax/grease remover so the paint you utilise for the car spray painting will adhere properly.

Two : Remove whatever rough spots by sanding. Once this has been done be certain to rinse off any of the loose sandings. This’s where you will want to use the putty to fill in any small pit marks, that’re have been caused from stones for illustration.

Three : Do not get in too much of a hurry to begin your car spray painting. The car must be totally dry so its best to leave it to do so for few hours. You could go ahead and cover any of the areas that your dont want to get paint on.

Four : At present youre ready to set out with the primer. Don’t skip this step, as it’ll give a much better look to the finished project. It helps the paint to adhere properly and allows for a more even finish. Next, once the primer is dry you’ll need to lightly sand it down.

5 : You are eventually at the step you have been waiting for. Its time to apply the color for your car spray painting. Whether you’ve chosen to use aerosol paints or a spray gun, the premise remains the same. Just apply thin coats. A few would probably be necessary. A Couple light coats are much better than one thick coat. You would be able to tell simply by looking at the car how many more coats of paint it’ll require. Various will just require two where as a few others might require three or four.

Six : Eventually, down to the last step and thats applying the clear coat. This’s done precisely the same as the colored coats.

Now you can have a look at your personalized car spraying.